|
The new ZETOR system 102H, 102SLX and 112 SLX loaders have been designed
specifically for Zetor Proxima tractors. Therefore, there are no compromises in the ZETOR system loader design. Every ZETOR system
loader is a
perfect match with ZETOR tractor, providing exceptional strength, high lifting speed, solid performance and long term
reliability in a compact format, all that in the traditional very high level of craftsmanship. ZETOR system loaders incorporate
many
special features not found on any other loader.
 |
 |
|
The base model 102H is a rugged low profile loader suitable for most Proxima models. Compared to previous
generation, it has reinforced boom, greater lifting height and much faster bucket dump and rollback.
|
The 102SLX is also a very rugged low profile loader, but it is equipped with mechanical self-leveling and bigger
lift cylinders. It is also equipped with additional linkage between the loader and the bucket, to substantially
increase rollback
and dump angle and speed.
|
 |
| The
112SLX is a long reach loader with increased lifting height for special applications. Its boom is longer and taller and is also
equipped with mechanical self-leveling.
|
|
Massive mounting frames are more than ¾"
thick and each side extends as one welded piece over the entire length of the tractor. Such design reduces the load on tractor
powertrain, ensuring long-term stability in professional use.
Few bolted joints also mean reduced maintenance.
|
Loader boom is made of high strength steel (yield strength 73,000 psi) and has a new reinforced torque tube made
of steel almost ½" thick. The torque tube is welded to the boom using two additional heavy back plates on each side.
This
makes the loader extremely resistant to twisting even in the most demanding applications.
|
|
|
Loader boom arms are manufactured by Zetor’s unique technology using just one longitudinal weld. In
addition to smooth appearance, this design also improves fatigue strength of the boom.
|
Custom designed for ZETOR Proxima tractors, ZETOR system loaders impose minimal restriction to ZETOR's very tight 55 degree
turning angle (even on MFWD models with front fenders).
|
 |
The location for the heavy-duty all-
metal joystick was carefully selected to provide the best operator's comfort. Access to the seat from the right side is not
restricted.
Zetor loaders now use a new, high precision hydraulic valve with soft return springs, which allows for more precise
joystick control (joystick moves very easily). |
Three-layer bushings with grease fittings
are used throughout, providing long life and easy replacement. |
 |
 |
 |
Release levers
...
|
... and drive away
|
|
Quick mount and unmount - within seconds and with no tools. Loader stands are adjustable in height for easy and safe parking on
uneven ground. When the loader is detached, the mounting frame leaves
good access for tractor maintenance, virtually as if there
was no loader on the tractor at all. The hydraulic valve stays on the tractor for multi-purpose uses. |
 |
 |
Drive in ...
|
... roll the bucket back and bucket snaps in
|
|
Buckets and other attachments have the proven quick-attach Euro tool carrier. To attach the bucket, there is no need
to leave the seat. The latch position indicator is clearly visible from the seat. |
|
Loader models 102SLX and 112SLX are
equipped with true mechanical self-leveling. The attachments stay at the same angle throughout the entire lifting range of the
loader. This is especially handy when using
pallet forks, but it is practical with any other attachment. Operator’s who have
tried a good self-leveling loader will never go back to a loader without this feature.
The mechanical self-leveling is
superior to any hydraulic self-leveling system. Since it is a pure mechanical device, it is very precise under any working
conditions, regardless of the load, oil temperature or any other factor.
Unlike many hydraulic self-leveling systems, the Zetor
true mechanical system works both during lifting and during lowering of the loader.
Due to its all-mechanical
design, it stays trouble- and service-free for life even under the most demanding real-life conditions. That is the reason why
professionals demand mechanical self-leveling systems.
So far, due to higher manufacturing costs, the mechanical self-leveling
systems have not been widely used in this category of loaders. Zetor’s large volume manufacturing technology of these
systems made it
possible to lower the production cost of the loader with true mechanical self-leveling and make it comparable with
a non-self-leveling loader.
|
|
 |
Loader hydraulics are designed specifically for ZETOR Proxima tractors
and do not occupy any of tractor quick couplers. All hoses and fittings needed for installation are included in the mounting kit.
Hoses have standard SAE hose fittings for easy servicing.
|
The available third function kit
can easily be added to any Zetor loader. Kit comes with a pair of quick couplers mounted directly on the boom.
Using a push
button in the joystick, it controls attachments with their own cylinder, such as grapple fork. |
 |
ZETOR SYSTEM LOADER ATTACHMENTS
|
Standard bucket: 73 in. (capacity 19
cu.ft struck level)
Optional buckets: 83 in. (21.5 cu.ft); 85 in. snow bucket (36 cu.ft).
All buckets
have bolt-on, replaceable wear edge and special wedged shape (wider at the front) for easier dumping of sticky materials.
Construction buckets with digging teeth in 53-in. and 62-in. width are available on special order.
Other tools (not shown)
are available on special order. All tools are identical and interchangeable with tools used on all other Zetor system loaders.
Blank plate sets are available to weld on your old attachments, to make them compatible with Zetor system quick-attach tool
carrier.
|
|
|
|
|
Manure Forks, 59
in. wide. 25 in. long tines |
Bale lift with 44 in. easy penetrating
spear |
Pallet forks (43.5 in. long) with heavy duty forged forks |
|
 |
To learn more about
Proxima click on one of the follwoing links:
Proxima
Engine
Transmissions
Brakes
Power Take Off
Cab
Three-Point Hitch
Specification
|
